Description

Cisco Enhanced Transport Shelf Controller for M2
M6
CPT200
CPT600 – For Data Networking – 1 x RJ-45 10Base-T Management
1 x RS-232 Serial Management CONTROLLER WITH ETHERNET PTP

The Cisco TNC
TNCE
TSC
and TSCE cards incorporate a highly stable Layer 3 internal timing reference to provide system timing based on input received from an external BITS source or from an incoming SONET or SDH optical signal. Synchronous status messaging helps the system select the best timing sources
and a holdover mode maintains timing accuracy when preprovisioned synchronization references are not available.

Nonvolatile database storage for communication
provisioning
and system control is provided
allowing full database recovery and survivability with complete system power loss. In addition
short-term clock recovery is also supported
reducing the need to reset the calendar and ToD settings after a brownout or complete power outage. Unique to the Cisco ONS 15454 M6
ONS 15454 M2
CPT 600
and CPT 200 is a memory module built into the chassis. This external memory is synchronized with the memory of the TNC
TNCE
TSC
and TSCE
thereby providing a backup to the node IP address
software package
and circuit database. This synchronization provides faster time to recovery when the node is used in simplex mode during a control-card replacement.

The Cisco TNC
TNCE
TSC
and TSCE cards have 2 built-in interface ports for accessing the system: an RJ-45 connector and an RS-232. The RJ-45 port provides 10BASE-T Ethernet connectivity to the system
providing local and remote access to the craft-management system
Cisco Transport Controller
through a common web interface. You can also use this port for interconnection to customer operations support systems (OSSs) and network management systems (NMSs)
providing integration to external element management systems (EMSs)
NMSs
and OSSs.

The Cisco TNC
TNCE
TSC
and TSCE cards provide security enhancements
allowing you to configure the front panel and Cisco ONS 15454 M6
ONS 15454 M2
CPT 600
and CPT 200 chassis Ethernet interfaces as regenerators or provision them with individual IP and MAC addresses for segregated craft and DCC access. The RS-232 port provides a serial ASCII interface for local craft access using VT100 emulation so that you can enter Transaction Language 1 (TL1) commands directly over a Telnet session without the assistance of a browser.

The front panels of the Cisco TNC
TNCE
TSC
and TSCE cards provide multicolored LEDs for a quick view of the status of the card activity
raised network alarms
shelf voltage input
LAN interface
and synchronization. Two front-panel buttons allow you to quiet an active external audible alarm (alarm-cutoff button) or test the working state of system LEDs. The Cisco TNC and TSC cards are supported beginning with the Cisco ONS 15454 MSTP Release 9.2.0 system software for both the Cisco ONS 15454 M6 and ONS 15454 M2 platforms. The Cisco TNCE and TSCE cards are supported beginning with the Cisco ONS 15454 MSTP Release 9.3.0 system software for both the Cisco ONS 15454 M6 and ONS 15454 M2 platforms
and the Cisco CPT 9.3.0 system software for both the Cisco CPT 600 and CPT 200 platforms. Deployed networks may consist of Cisco ONS 15454 nodes equipped with Cisco Timing
Communications
and Control Two (TCC2)
TCC2P
or TCC3 processor cards.

Product Type:Processing Module
Manufacturer Part Number:15454-M-TSCE-K9
Manufacturer Website Address:http://www.cisco.com
Manufacturer:Cisco Systems
Inc
Product Name:Enhanced Transport Shelf Controller for M2
M6
CPT200
CPT600
Interfaces/Ports Details:1 x RS-232 Serial Management
1 x RJ-45 10Base-T Management
Connector Type:RJ-45
Total Number of Ports:2
Compatibility:

Cisco Chassis:

• M2
• M6

Weight (Approximate):2.05 lb
Height:12.7″
Width:0.7″
Depth:9″
Application/Usage:Data Networking