Description
Crown DriveCore Install 2|600N Amplifier – 600 W RMS – 2 Channel – Black – 0.4% THD – 20 Hz to 20 kHz – 375 W – Ethernet TWO-CHANNEL 600W 4 POWER AMPLIFIER
ANALOG & DIGITAL INPUTS – With digital audio transport via HARMAN’s proprietary BLU-Link
plus balanced analog inputs
DCi gives you a tremendous audio advantage – at a much lower cost. The priority input router allows you to specify a primary input
and if audio is lost the amp automatically switches to the other input.
NETWORK MONITORING & CONTROL – Better monitoring
control and audio manipulation with the HiQnet™ protocol that’s over standard TCP/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition
this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.
PROGRAMMABLE GENERAL PURPOSE INPUT/OUTPUT PORTS – GPIO ports can be configured in many different ways
such as volume controls
recall presets
or to report errors to a master computer.
DIGITAL SIGNAL PROCESSING – DSP capabilities include the following:
- LevelMAX Limiters
- Input/Output EQ
- Delay
- Matrix Mixer
- Speaker Line Monitoring
Audio Channels:2
RMS Output Power:600 W
Product Type:Amplifier
Impedance:4 Ohm
Classification:D
Ethernet:Yes
Maximum Frequency Response:20 kHz
Product Family:DriveCore Install DCi
Product Color:Black
Manufacturer Part Number:DCI2X600N-U-USFX
Manufacturer Website Address:http://www.harman.com
Manufacturer:Harman International Industries
Inc
Product Model:2|600N
Product Name:DriveCore Install DCi 2|600N Amplifier
Product Line:DriveCore Install
Product Series:DCi
Country of Origin:Mexico
Weight (Approximate):18.80 lb
Height:3.5″
Width:19″
Depth:14.3″
Operating Power Consumption:375 W
Minimum Frequency Response:20 Hz
Total Harmonic Distortion (THD):0.4%
