Description
Omnitron Systems OmniConverter 10GPoEBT/Sx 3062B-0-24-9Z Ethernet Switch – 6 Ports – 2 Layer Supported – Modular – 2 SFP Slots – 100 W PoE Budget – Optical Fiber
Twisted Pair – PoE Ports – Wall Mountable
DIN Rail Mountable
Shelf Mountable
Rack-mountable – 5 Year Limited Warranty 2X1G/10G SFP+ – 4X 10/100/1000T ET
The OmniConverter 10GPoEBT/Sx are unmanaged Ethernet switches that feature two 1/10G uplink ports and four 10/100/1000 RJ-45 copper Power Sourcing Power-over-Ethernet user ports. The 10GPoEBT/Sx available with 60W or 100W (IEEE 802.3bt) per user port.
The OmniConverter PoE switches are Layer 2 Ethernet switches that forward frames to any port based on their MAC address.
All models support Directed Switch mode
which directs multicast traffic (such as video) only to the appropriate uplink port
preventing multicast traffic from flooding other network ports.
The switches support daisy-chain configurations and redundant uplinks for critical applications that require protection and sub 50ms restoration in the event of an uplink failure.
The switches support Dual Device mode that enables the 10GPoEBT/Sx to operate as two independent and isolated Ethernet switches.
The 10GPoEBT/Sx modes of operation can be configured using easily accessible DIP-switches. Each DIP-switch function is labeled on the side of the OmniConverter for ease of identification and use.
The OmniConverter switches are available with Small Form Pluggable (SFP) transceiver receptacle ports. The SFP ports support 10/100/1000BASE-T
1000BASE-T and 10GBASE-T copper transceivers. They also support 1G and 10G multimode or single-mode fiber
dual or single-fiber and standard or CWDM wavelengths.
The switches automatically negotiate and deliver the power level required by a Powered Device (PD) partner. Depending on the model of the OmniConverter PoE switch
the switch can deliver up to 60 or 100 Watts of power per user port.
The switches features a Remote PoE Power Reset that can be configured with a DIP-switch. This feature enables the user to remotely power-cycle and reset each PD increasing network reliability
up time and save manpower time and expense by automating the recovery of remote PD equipment.
All models can be wall mounted
rack mounted using a shelf or DIN-rail mounted using DIN-rail mounting clips. They are available with an external 100 to 240V AC power adapter or with a DC terminal connector. Product Type:Ethernet Switch
Power Source:Power Supply
Layer Supported:2
Form Factor:Rack-mountable
Expansion Slot Type:SFP
Manageable:Yes
Ethernet Technology:Gigabit Ethernet
Fast Ethernet
Number of Total Expansion Slots:4
Product Family:500
Stack Port:Yes
Media Type Supported:Optical Fiber
Twisted Pair
Total Number of Network Ports:24
Redundant Power Supply Supported:No
Manufacturer Part Number:SF500-24-K9-NA-RF
Manufacturer Website Address:http://www.cisco.com
Manufacturer:Cisco Systems
Inc
Product Model:SF500-24
Product Name:SF500-24 Ethernet Switch
Product Series:500
Product Condition:Refurbished
Number of SFP Slots:4
Shared SFP Slot:Yes
Modular:Yes
Uplink Port:No
Port/Expansion Slot Details:24 x Fast Ethernet Network
4 x Gigabit Ethernet Expansion Slot
Network Technology:10/100Base-TX
10/100/1000Base-T
1000Base-X
Weight (Approximate):6.83 lb
Height:1.7″
Width:17.3″
Depth:10.1″
Compatible Rack Unit:1U
