Description
AtlasIED 324-15 Rack Cabinet – For A/V Equipment
Computer – 24U Rack Height x 19″ Rack Width – Wall Mountable
Standalone – Black – Cold-rolled Steel (CRS)
Steel – TAA Compliant ADJUSTABLE RAILS 15IN DEEP 24RU
The 300 Series wall cabinets are welded with center-section depths of 12″ and 15″
respectively. Basic model includes three
16-gauge CRS sections which include a 2″ deep
solid-steel front door
a 12″ or 15″ deep center section with adjustable mounting rails
and a
4 1/2″ deep rear door. Panel space openings range from 7 RU to 35 RU. Enclosures are equipped with provisions for custom cabinet mounting
wire management
equipment mounting
and structural support. Cabinet is finished in #962 black epoxy.
All models include adjustable front rack rails tapped 10-32
and manufactured to standard E.I.A. 1/2″ spacing. Models with RU openings of 16RU
24RU and 35RU are equipped with center section mounting rail supports.
Internal open raceways provide cable pathways in the cabinet. Corner brace supports
which straddle the back and side panel of the rear section (hinge side)
also feature round (1 1/4″ diameter) wire access holes for harnessing excess wire. The back face of the rear section is equipped with 1/4″ deep boss detents which give Contractors field flexibility to install a custom plywood
aluminum
or steel sub-plate for mounting accessories inside the cabinet. Boss detents are on 12″ centers and vary depending upon model height (10RU
12RU
and 16RU models have four detents
24RU models have six detents and 35RU models have eight detents).
The cabinets have 20 conduit knockouts on the rear section
with the exception of the 307-12 which has 16. Conduit arrays are located at the top and bottom of the back panel (except 307-12 which has a centered array)
as well as on the top and bottom back flanges. Panel arrays consist of four knockouts: two 1″ (25mm) standard and two 1/2″ (13mm) / 3/4″ (19mm) concentric. Top and bottom flange arrays are comprised of six knockouts: three 1″ (25mm) standard and three 1/2″ (13mm) / 3/4″ (19mm) concentric.
Perforated vents
located on both sides (top and bottom) of the center section
provide ventilation for rack-mounted electronics.
The cabinets offer exceptional structural support. The units’ one- piece front and rear sections are strengthened with frame flanges on bottom
top
and sides. Center sections are plug-welded
joining bottom and top panels to side panels. Rear sections have corner brace supports which bridge the back and side panel (hinge side) giving the back (mounted) panel extra reinforcement for tension relief.
Cabinets also have electric-welded seams and miters which increases the cabinets’ overall bonding. The center section offers maximum reinforcement provisions
such as a uniquely designed center section guide plate that reduces potential sagging by distributing cabinet and equipment weight to rear section. The 11-gauge
1 7/8″ wide guide plate
which mounts to the rear section’s bottom flange
provides a 3/4″ lip for added support to the center section when the cabinet is open or closed. The plate also ensures that an equipment-weighted center section will close properly
by “guiding” alignment pins into respective holes.
Application/Usage:A/V Equipment|Computer
Product Type:Rack Cabinet
Form Factor:Standalone|Wall Mountable
Rack Width:19″
Rack Height:24U
Assembly Required:Yes
Height:45″
Width:20.6″
Depth:21.5″
Product Family:300
TAA Compliant:Yes
Product Color:Black
Product Material:Cold-rolled Steel (CRS)|Steel
Manufacturer Part Number:32415
Manufacturer Website Address:http://www.atlassound.com
Manufacturer:AtlasIED
Product Model:324-15
Product Name:324-15 Rack Cabinet
Product Series:300
Country of Origin:United States
