Description
Omnitron Systems FlexPoint GX/T 10/100/1000 Copper to 100/1000X Fiber Ethernet Media Converter – 1 x Network (RJ-45) – 1 x ST Ports – DuplexST Port – Single-mode – Gigabit Ethernet – 10/100/1000Base-T
1000Base-X
1000Base-FX – Rail-mountable
Wall Mountable
Rack-mountable
Tabletop – TAA Compliant 1000FX ST SM 1310 12KM AC WIDE TEMP
The FlexPoint GX/T is a 10/100/1000BASE-T copper to 1000BASE-X fiber media converter that supports jumbo frames up to 10
240 bytes. The GX/T features Small Form Pluggable (SFP) transceivers that support both 100BASE-FX and 1000BASE-X for interoperability with Gigabit and Fast Ethernet fiber equipment. SFP transceivers enable adaptability to different fiber types
speed and distances
and support Coarse Wave Division Multiplexing (CWDM) wavelengths.
The FlexPoint GX/T also supports ST
SC and LC; and fixed fiber connectors for multimode
single-mode fiber; and single-mode single-fiber models are available.
Both the fiber port and the RJ-45 port support auto-negotiation to achieve the best possible mode of operation (speed
duplex mode and Pause mode) between the devices. The auto-negotiation feature can be disabled on both ports (for manual configuration) using DIP-switches on the product. This is useful in a situation where the GX/T is connected to a non-negotiating device and the configuration parameters must be set manually.
Network flow control is managed by the Pause function (configured via auto-negotiation or manually) that prevents network congestion on both the RJ-45 and fiber ports. When Pause is enabled and the device is experiencing network congestion
it will send out a Pause signal to its link partner
instructing it to slow down data transmission.
A variety of testing and fault detection tools are provided for easy installation and troubleshooting. The GX/T supports Port Loop-Back
IEEE defined Far-End-Fault and Link Fault bit as Remote Fault indicators. The GX/T generates a remote fault indicator when it detects link fault conditions
and reports detection of these signals by displaying status on the LED. Through user DIP-switch configuration
the detection of these indicators or link modes can also be propagated to the other port on the GX/T as a means of notifying connected end-devices of the link fault.
Diagnostic status LED indicators assist in network installation and maintenance. The LEDs report the availability of power
port activity and link status and duplex mode.
The GX/T supports a wide input voltage range of 5 to 32VDC for flexibility to power the device from a variety of sources.
GX/T modules can be standalone or surface-mounted utilizing optional wall-mounting hardware or DIN-rail mounting brackets. They can also be rack-mounted in a 5-Module shelf or in a high-density 14-Module
power-redundant chassis.
Product Type:Transceiver/Media Converter
Maximum Distance Supported:7.46 Mile
Power Source:AC Adapter
Form Factor:Tabletop|Rack-mountable|Wall Mountable|Rail-mountable
Network Technology:1000Base-FX|10/100/1000Base-T|1000Base-X
Ethernet Technology:Gigabit Ethernet
Number of Network (RJ-45) Ports:1
Network (RJ-45):Yes
Product Family:FlexPoint GX/T
Number of ST Ports:1
Media Type Supported:Twisted Pair|Optical Fiber
Fiber Mode Supported:Single-mode
Total Number of Ports:2
ST Port Type:Duplex
TAA Compliant:Yes
Manufacturer Part Number:4707-1W
Manufacturer Website Address:http://www.omnitron-systems.com
Manufacturer:Omnitron Systems
Product Model:4707-1W
Product Name:FlexPoint GX/T 10/100/1000 Copper to 100/1000X Fiber Ethernet Media Converter
Product Line:FlexPoint
Product Series:GX/T
Fiber Optic Cable Standard:9/125 µm
Fiber Optic Wavelength:1310 nm
Package Contents:
Country of Origin:United States
Environmentally Friendly:Yes
Environmental Certification:REACH|RoHS 2|WEEE
Weight (Approximate):6 oz
Height:1″
Width:3″
Depth:4″
