Description

HPE 100Gb QSFP28 MPO SR4 100m Transceiver – For Optical Network, Data Networking – 1 x MPO 100GBase-SR4 Network – Optical Fiber – Multi-mode – 100 Gigabit Ethernet – 100GBase-SR4 PL=SI

What if you could deploy 100 Gb transceiver connections with an overall reduction of cost per bit? The HPE 100Gb QSFP28 Transceiver is designed to meet the increasing demand of growing bandwidth in the data center. The 100 Gb performance allows a reduction of the port density and number of hardware components required to achieve this higher speed.

With reduction of cost per bit, The HPE 100Gb QSFP28 Transceiver can significantly reduce Capex and Opex spending on interconnect connections. When the fiber optic cable is attached via a standard MPO connector, up to 100m connection can be conducted via multi-mode fibers.

Features

The HPE 100Gb QSFP28 MPO SR4 100m Transceiver has four optical lanes in each direction, allowing each to operate at 25 Gb.

MPO connector for plugging in multi-mode fiber cables.

Maximum link length of 70 m on OM3 and 100 m on OM4 multimode fiber at 100 Gb/s.

Bit-error Rate (BER) lower than 10-15.

3.3 V power supply.

Product Type:QSFP28
Network Technology:100GBase-SR4
Ethernet Technology:100 Gigabit Ethernet
Media Type Supported:Optical Fiber
Manufacturer Part Number:845966-B21
Manufacturer Website Address:http://www.hpe.com
Manufacturer:Hewlett Packard Enterprise
Product Name:100Gb QSFP28 MPO SR4 100m Transceiver
Interfaces/Ports Details:1 x MPO 100GBase-SR4 Network
Connector Type:MPO
Total Number of Ports:1
Fiber Mode Supported:Multi-mode
Environmentally Friendly:Yes
Environmental Certification:REACH
Weight (Approximate):0.08 lb
Height:0.3″
Width:0.7″
Depth:2.9″
Application/Usage:Optical Network|Data Networking