Description
Cisco Aironet PoE Injector – 120 V AC
230 V AC Input – 55 V DC
2 A Output – 1 x Ethernet Input Port(s) – 1 x Ethernet Output Port(s) – 60 W – Pole/Wall-mountable INJECTOR OUTDOOR NA PLUG REMAN
The power injector increases wireless LAN deployment flexibility of the access point by combining 55-VDC power with the data signal
and sending both to the connected access point.
The power injector combines 55-VDC power (supplied by internal power supply) with the data signal
sending both to the access point. The power injector provides up to 60 W over all four wire pairs of shielded
outdoor rated Ethernet cable.
The total length of the Ethernet cable from the AP to the switch must not exceed 320 ft (100 m). The wire gauge of the cable must be 26 AWG.
The Ethernet cable from the switch to the power injector must be a shielded CAT5e or higher Ethernet cable. The Ethernet cable from the power injector to the access point must be a shielded outdoor-rated CAT5e or higher Ethernet cable with a 0.20 to 0.35 inch diameter.
Product Type:PoE Injector
Mount Type:Pole/Wall-mountable
Output Ports:1 x Ethernet
Manufacturer Part Number:AIRPWRINJ60RGD1-RF
Manufacturer Website Address:http://www.cisco.com
Manufacturer:Cisco Systems
Inc
Product Name:Aironet PoE Injector
Product Line:Aironet
Product Condition:Refurbished
Input Ports:1 x Ethernet
Compatibility:Cisco Aironet 1560 Series Outdoor Access Points
Certifications & Standards:
- CE
- IEEE 802.3af
- IEEE 802.3at
- FCC Part 15
Class B - CE
EN50522 Class B - EN55024
- VCCI
- EN61000-4-5 Class 5 (6kV CM)
- UL60950-1
- UL60950-22
Environmentally Friendly:Yes
Environmental Certification:GS
RoHS
WEEE
Weight (Approximate):2.98 lb
Length:8.4″
Height:2.8″
Width:5.9″
Input Voltage:230 V AC
120 V AC
Maximum Output Current:2 A
Maximum Output Power:60 W
Maximum Output Voltage:55 V DC
Protection Type:Surge Protection