Description

Tripp Lite DisplayPort to HDMI Over Cat6 Extender Kit 4K60Hz HDR 4:4:4 PoC – 2 Input Device – 4 Output Device – 230 ft Range – 3 x Network (RJ-45) – 2 x HDMI Out – DisplayPort – 4K UHD – 3840 x 2160 – Twisted Pair – Category 6 – Rack-mountable – TAA Compliant EXTENDER KIT 4K60HZ HDR 4:4:4 POC

Features | Cat6 Extender Kit Ideal for Digital Signage in Schools and Workplaces
This 4K transmitter/transceiver extender kit is recommended for video presentations in conference rooms
schools
trade shows
meeting facilities
houses of worship
retail settings
hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. The B127A-111-BDTH extends 4K signals from a DisplayPort source to an HDMI display up to 230 feet (70.1 meters) away via user-supplied Cat6 cabling.

Extends Crystal-Clear 4K Video with Multi-Channel Audio
HDR and 4:4:4 Color
The B127A-111-BDTH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz with 7.1-channel surround sound and 36-bit Deep Color. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast
brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. Advanced 4:4:4 chroma subsampling is ideal for top-level PC gaming or using your HDTV as a PC monitor.

Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution
To monitor the video signal being extended to the transceiver
connect a 4K display to the transmitter’s local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities
so the connected monitor must also support 4K/60 Hz to function properly.

Built-In PoC Technology Provides Receiver Power to Avoid Bulky External Power Bricks
Power over Cable (PoC) technology powers the connected receivers over Cat6 cable. LEDs indicate when the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the receivers where needed without worrying about finding a nearby AC outlet.

Create a Daisy Chain of Displays to Achieve Even More Distance
This extender kit is capable of forming daisy-chain installations up to 920 feet (280.4 meters) from the transmitter by connecting additional B127A-110-BH transceivers (sold separately) and HDMI displays. Up to four total B127A-110-BH transceivers can be chained together
each capable of extending a 4K/60 Hz signal up to 230 feet per unit. The transceiver is also compatible with Tripp Lite’s B127A-010-H signal booster (sold separately)
which allows the signal to be boosted up to 400 feet (121.9 meters) total between the transmitter and transceiver. When used in a daisy-chain installation
this brings the total extension distance up to 1
090 ft. (332.2 meters). Note: B127A-010-H will only work when used in the first link of the daisy-chain installation.

Plug-and-Play Operation for Quick Setup and Immediate Use
The included transmitter and transceiver work right out of the box with no software required. Mounting hardware is included for installing the units on a wall
pole or 19-inch rack. Connect the transmitter to the source with a user-supplied DisplayPort cable (such as Tripp Lite’s P580-Series). Then
connect the transceiver to the display with a user-supplied HDMI cable (such as Tripp Lite’s P568- or P569-Series). Finally
connect the two units with user-supplied Cat6 cable (such as Tripp Lite’s N202-Series).

TAA-Compliant for GSA Schedule Purchases
The B127A-111-BDTH is compliant with the Federal Trade Agreements Act (TAA)
which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Product Type:Video Extender Transceiver
Connectivity Technology:Wired
Form Factor:Rack-mountable
Maximum Operating Distance:230 ft
Number of Network (RJ-45) Ports:3
DisplayPort:Yes
Media Type Supported:Twisted Pair
Number of Output Devices Supported:4
Number of Input Devices Supported:2
TAA Compliant:Yes
Manufacturer Part Number:B127A-111-BDTH
Manufacturer Website Address:http://www.tripplite.com
Manufacturer:Tripp Lite by Eaton
Product Model:B127A-111-BDTH
Product Name:B127A-111-BDTH Video Extender Transceiver
Network (RJ-45):Yes
Number of HDMI Outputs:2
HDMI Out:Yes
Twisted Pair Cable Standard:Category 6
Package Contents:

Country of Origin:Taiwan
Environmentally Friendly:Yes
Environmental Certification:RoHS|REACH
Transmitter Height:1.06″
Transmitter Width:4.53″
Transmitter Depth:2.46″
Receiver Height:1.06″
Receiver Width:4.53″
Receiver Depth:2.46″
Transmitter Weight (Approximate):1 lb
Receiver Weight (Approximate):1 lb
Product Color:Black
Frequency:50 Hz|60 Hz
Graphics Modes:4K UHD
Maximum Video Resolution:3840 x 2160