Description
Tripp Lite DisplayPort to HDMI Over Cat6 Extender Kit w Wall Plate Receiver – 2 Input Device – 4 Output Device – 230 ft Range – 2 x Network (RJ-45) – 2 x HDMI Out – DisplayPort – 4K UHD – 3840 x 2160 – Twisted Pair – Category 6 – Wall Plate – TAA Compliant EXTENDER KIT W WALL PLATE RECEIVER
Features | Cat6 Extender Kit Ideal for Digital Signage in Schools
Restaurants and Lecture Halls
This complete transmitter and receiver system is recommended for video presentations in conference rooms
schools
trade shows
meeting facilities
houses of worship
retail settings
hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. The metal transmitter box and the single-gang metal wall plate receiver with metal back cover blend perfectly into the room décor.
Extends a 4K A/V Transmission up to 230 ft….or Even Farther
The B127A-1A1-BDFH extends 4K signals from a DisplayPort source device to an HDMI display up to 230 feet (70.1 meters) away via user-supplied Cat6 cabling. By adding a Tripp Lite B127A-010-H HDMI repeater (sold separately) to the application
you can extend the signal up to 400 feet (121.9 meters).
Transmits Crystal-Clear 4K Video with Multi-Channel Audio and 4:4:4 Color
The B127A-1A1-BDFH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz
as specified in HDMI 2.0
with 7.1-channel surround sound. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor.
Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks
After you connect the included external power supply to the transmitter
Power over Cable (PoC) technology powers the receiver over Cat6 cable. LEDs on both the transmitter and receiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to install the receiver where best needed without worrying about finding a nearby AC outlet.
Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution
To monitor the video signal being extended to the receiver
connect a 4K display to the transmitter’s local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities
so the connected monitor must also support 4K/60 Hz to function properly.
Plug-and-Play Operation for Quick Setup and Immediate Use
The included transmitter and receiver units work right out of the box with no software required. Connect the transmitter to the source with a user-supplied DisplayPort cable (such as Tripp Lite’s P580-Series). Then
connect the receiver to the display with a user-supplied HDMI cable (such as Tripp Lite’s P569-XXX-CERT or P568-XXX-2A). Finally
connect the two units with user-supplied Cat6 patch cable (such as Tripp Lite N202-Series). Mounting hardware is included for both units.
TAA-Compliant for GSA Schedule Purchases
The B127A-1A1-BDFH is compliant with the Federal Trade Agreements Act (TAA)
which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Typical Applications
- Extend video signals from one room to another using Cat6 cable
which can pass through conduit to meet building codes - Gain flexibility in where the receiver is installed
with the freedom to install it away from an AC outlet - Improve the line of sight for digital signage in a hotel
restaurant
theater
house of worship
trade show or other location
System Requirements
- Source device with DisplayPort output (computer
media server
laptop) - Display device with HDMI input (HDTV
projector
monitor)
Product Type:Video Extender Transceiver
Connectivity Technology:Wired
Form Factor:Wall Plate
Maximum Operating Distance:230 ft
Number of Network (RJ-45) Ports:2
DisplayPort:Yes
Media Type Supported:Twisted Pair
Number of Output Devices Supported:4
Number of Input Devices Supported:2
TAA Compliant:Yes
Manufacturer Part Number:B127A-1A1-BDFH
Manufacturer Website Address:http://www.tripplite.com
Manufacturer:Tripp Lite by Eaton
Product Model:B127A-111-BDTH
Product Name:B127A-111-BDTH Video Extender Transceiver
Network (RJ-45):Yes
Number of HDMI Outputs:2
HDMI Out:Yes
Twisted Pair Cable Standard:Category 6
Package Contents:
50/60 Hz
0.6A; Output: 24V 1A)
Europe
U.K. and Australia)
Country of Origin:Taiwan
Environmentally Friendly:Yes
Environmental Certification:REACH|RoHS
Transmitter Height:1.06″
Transmitter Width:4.53″
Transmitter Depth:2.46″
Receiver Height:4.53″
Receiver Width:2.76″
Receiver Depth:1.33″
Transmitter Weight (Approximate):1 lb
Receiver Weight (Approximate):1 lb
Product Color:White/Black
Frequency:50 Hz|60 Hz
Graphics Modes:4K UHD
Maximum Video Resolution:3840 x 2160
