Description
Tripp Lite HDMI Over Cat6 Extender Kit w KVM Support 4K60Hz USB/IR PoC TAA – 1 Input Device – 1 Output Device – 230 ft Range – 2 x Network (RJ-45) – 3 x USB – 1 x HDMI In – 1 x HDMI Out – 4K UHD – 3840 x 2160 – Twisted Pair – Category 6 – Wall Mountable
Rack-mountable – TAA Compliant KVM SUPPORT 4K60HZ USB/IR POC TAA
Features
HDMI Extender Kit Ideal for Digital Signage in Schools
Restaurants and Lecture Halls
This complete transmitter and receiver system is recommended for video presentations in conference rooms
schools
trade shows
meeting facilities
houses of worship
retail settings
hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow.
Extends a 4K A/V Transmission up to 230 ft….and More
The B127A-1A1-BHBH extends 4K signals from an HDMI source device to an HDMI display up to 230 feet away via user-supplied Cat6 cabling. By adding a Tripp Lite B127A-010-H HDMI repeater or B127A-110-BH transceiver (sold separately) to the application
you can extend the signal up to 400 or 460 feet
respectively.
Dip Switches Extend Your Choice of Either USB or IR.
The DIP switches on both the transmitter and receiver can be adjusted to let you choose from the USB 1.1 or bi-directional IR functions. Choose to either control the source device via keyboard and mouse or IR remote control from the display end of the installation. Only one function can be extended at a time.
Transmits Crystal-Clear 4K Video with Multi-Channel Audio
HDR and 4:4:4 Color
The B127A-1A1-BHBH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz
as specified by HDMI 2.0
with full
rich uncompressed DTS-HD
Dolby TrueHD and 7.1-channel digital audio. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast
brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization allows you to fine-tune the image quality at the remote display.
Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution
To monitor the video signal being extended to the receiver
connect a 4K display to the transmitter’s local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities
so the connected monitor must also support 4K/60 Hz to function properly.
Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks
Power over Cable (PoC) technology powers the transmitter or receiver over Cat6 cable. LEDs on both unit will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the unit where needed without worrying about finding a nearby AC outlet.
Plug-and-Play Operation for Quick Setup and Immediate Use
The included transmitter and receiver units work right out of the box with no software required. Mounting hardware is included for installing both units on a wall
pole or 19-inch rack. Connect the transmitter to the source with a user-supplied HDMI cable (such as Tripp Lite’s P568- or P569-Series). Then
connect the receiver to the display with another user-supplied HDMI cable. Finally
connect the two units with user-supplied Cat6 patch cable (such as Tripp Lite N202-Series).
TAA-Compliant for GSA Schedule Purchases
The B127A-1A1-BHBH is compliant with the Federal Trade Agreements Act (TAA)
which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Typical Applications
- Connect a laptop for a video or PowerPoint presentation in an auditorium or lecture hall
where the source device changes frequently
Product Type:Video Extender Transmitter/Receiver
Connectivity Technology:Wired
Form Factor:Rack-mountable|Wall Mountable
Maximum Operating Distance:230 ft
Number of Network (RJ-45) Ports:2
Number of USB Ports:3
Number of HDMI Inputs:1
Media Type Supported:Twisted Pair
Number of Output Devices Supported:1
Number of Input Devices Supported:1
TAA Compliant:Yes
Manufacturer Part Number:B127A-1A1-BHBH
Manufacturer Website Address:http://www.tripplite.com
Manufacturer:Tripp Lite by Eaton
Product Model:B127A-1A1-BHBH
Product Name:B127A-1A1-BHBH Video Extender Transmitter/Receiver
USB:Yes
Network (RJ-45):Yes
Number of HDMI Outputs:1
HDMI In:Yes
HDMI Out:Yes
Twisted Pair Cable Standard:Category 6
Package Contents:
50/60 Hz
0.6A; Output: 24V 1A)
Europe
U.K. and Australia)
Country of Origin:Taiwan
Environmentally Friendly:Yes
Environmental Certification:REACH|RoHS
Transmitter Height:2.70″
Transmitter Width:11.50″
Transmitter Depth:6.24″
Receiver Height:2.70″
Receiver Width:11.50″
Receiver Depth:6.24″
Transmitter Weight (Approximate):15.87 oz
Receiver Weight (Approximate):15.87 oz
Graphics Modes:4K UHD
Maximum Video Resolution:3840 x 2160
