Description
Tripp Lite HDMI Over Cat6 Extender Kit Wallplate Trans/Rec Dual Output 4K – 1 Input Device – 1 Output Device – 230 ft Range – 2 x Network (RJ-45) – 1 x HDMI In – 2 x HDMI Out – 4K UHD – 3840 x 2160 – Twisted Pair – Category 6 – Wall Plate – TAA Compliant WALLPLATE TRANS/REC DUAL OUTPUT 4K
Features
HDMI Extender Kit Ideal for Digital Signage in Schools
Restaurants and Lecture Halls
This complete wall-plate-style transmitter and dual-output receiver system is recommended for video presentations in conference rooms
schools
trade shows
meeting facilities
houses of worship
retail settings
hotels and other digital signage applications where the source and displays are farther apart than conventional A/V cables allow. Both the transmitter and receiver have a single-gang metal wall plate design with a metal back cover and blend perfectly into the room décor.
Extends a 4K A/V Transmission up to 230 ft….or More
The B127A-2A1-FHFH extends 4K signals from an HDMI source device to two HDMI displays up to 230 feet away via user-supplied Cat6 cabling. Bi-directional IR remote control lets you operate the source from the display end of the installation. By adding a Tripp Lite B127A-010-H HDMI repeater (sold separately) to the application
you can extend the signal up to 400 feet.
Multi-Resolution Support Allows Mixing and Matching of Displays of Different Resolutions
Say you have a brand new 4K (at 60 Hz) HDTV in the living room
but want to also connect your Blu-ray player or satellite box to the older 1080p TV in the bedroom. The B127A-2A1-FHFH is backward compatible with 4K (at 30 Hz) and 1080p (at 60 Hz) resolutions. This allows each connected television to display video at its maximum resolution.
Transmits Crystal-Clear 4K Video with Multi-Channel Audio
HDR and 4:4:4 Color
The B127A-2A1-FHFH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz
as specified by HDMI 2.0
with full
rich uncompressed DTS-HD
Dolby TrueHD and 7.1-channel digital audio. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast
brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization automatically fine-tunes the image quality at the remote display.
Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution
To monitor the video signal being extended to the receiver
connect a 4K display to the transmitter’s local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities
so the connected monitor must also support 4K/60 Hz to function properly.
Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks
After you connect the included external power supply to either the transmitter or receiver
Power over Cable (PoC) technology powers the opposite unit over Cat6 cable. LEDs on both the transmitter and receiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place one unit where needed without worrying about finding a nearby AC outlet.
Plug-and-Play Operation for Quick Setup and Immediate Use
The included transmitter and receiver units work right out of the box with no software required. Connect the transmitter to the source with a user-supplied HDMI cable (such as Tripp Lite’s P568- or P569-Series). Then
connect the receiver to the displays with user-supplied HDMI cables. Finally
connect the two units with user-supplied Cat6 patch cable (such as Tripp Lite N202-Series).
Product Type:Video Extender Transmitter/Receiver
Connectivity Technology:Wired
Form Factor:Wall Plate
Maximum Operating Distance:230 ft
Number of Network (RJ-45) Ports:2
Number of HDMI Inputs:1
Media Type Supported:Twisted Pair
Number of Output Devices Supported:1
Number of Input Devices Supported:1
TAA Compliant:Yes
Manufacturer Part Number:B127A-2A1-FHFH
Manufacturer Website Address:http://www.tripplite.com
Manufacturer:Tripp Lite by Eaton
Product Name:Video Extender Transmitter/Receiver
Network (RJ-45):Yes
Number of HDMI Outputs:2
HDMI In:Yes
HDMI Out:Yes
Twisted Pair Cable Standard:Category 6
Package Contents:
50/60 Hz
0.6A; Output: 24V 1A)
Europe
U.K. and Australia)
Country of Origin:Taiwan
Environmentally Friendly:Yes
Environmental Certification:RoHS|REACH
Transmitter Height:4.53″
Transmitter Width:2.76″
Transmitter Depth:1.34″
Receiver Height:4.53″
Receiver Width:2.76″
Receiver Depth:1.34″
Transmitter Weight (Approximate):1 lb
Receiver Weight (Approximate):1 lb
Product Color:White
Frequency:50 Hz|60 Hz
Graphics Modes:4K UHD
Maximum Video Resolution:3840 x 2160
