Description

Tripp Lite HDMI Over Cat6 Extender Kit for Medical Applications 4K60Hz PoC – 1 Input Device – 1 Output Device – 230 ft Range – 2 x Network (RJ-45) – 1 x HDMI In – 1 x HDMI Out – 4K UHD – 3840 x 2160 – Twisted Pair – Category 6 – Rack-mountable – TAA Compliant FOR MEDICAL APPLICATIONS 4K60HZ POC

All-in-One HDMI Extender Kit Ideal for Medical Environments
This complete transmitter and receiver system is recommended for transmitting 4K video for medical applications in hospitals
clinics
physicians’ offices and other medical environments where the source and display are farther apart than conventional A/V cables allow. The extender kit conforms to strict EMI/RFI and ESD requirements.

Extends a 4K A/V Transmission Up to 230 ft.
The B127M-101-H extends 4K signals from an HDMI source device to an HDMI display up to 230 feet (70 meters) away via user-supplied Cat6 cabling.

Transmits Crystal-Clear 4K Video with Multi-Channel Audio
The HDCP 2.2-compliant B127M-101-H supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz
as specified by HDMI 2.0
with 36-bit Deep Color
4:4:4 chroma subsampling and full
rich uncompressed DTS-HD
Dolby TrueHD and 7.1-channel digital audio. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast
brighter whites and deeper blacks that pop on a 4K display. Built-in equalization allows you to fine-tune the image quality at the remote display.

Meets EMI/RFI and ESD Requirements Necessary for Use in Medical Applications
The transmitter and receiver both meet CISPR 11- Group 1 Class A and IEC 61000-4-2 (ESD) Test level 4 standards for environments with strict EMI/RFI and ESD limitations. They are approved for medical applications where reducing electrical interference is vital to the proper functioning of equipment.

Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution
To monitor the video signal being extended to the receiver
connect a 4K display to the transmitter’s local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities
so the connected monitor must also support 4K/60 Hz to function properly.

Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks
Power over Cable (PoC) technology powers the receiver over Cat6 cable. LEDs on both units will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the receiver where needed without worrying about finding a nearby AC outlet.

Plug-and-Play Operation for Quick Setup and Immediate Use
The included transmitter and receiver work right out of the box with no software required. Mounting hardware is included for installing both units on a wall
pole or 19-inch rack. Connect the transmitter to the source with a user-supplied HDMI cable (such as Tripp Lite’s P568- or P569-Series). Then
connect the two units with user-supplied Cat6 patch cable (such as Tripp Lite N262-Series). Finally
connect the receiver to the display with another user-supplied HDMI cable.

TAA-Compliant for GSA Schedule Purchases
The B127M-101-H is compliant with the Federal Trade Agreements Act (TAA)
which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Typical Applications

• Connect a laptop for a video or PowerPoint presentation in a hospital conference room
  where the source device changes frequently
• Extend video signals from one room to another using Cat6 cable
  which can pass through conduit to meet building codes
• Gain flexibility in where the units are placed
  with the freedom to move and relocate the PoC receiver away from an AC outlet
• Improve the line of sight for digital signage in a hospital
  clinic
  doctor’s office or other medical setting

Product Type:Service
Provided Support:Replacement
Web Knowledge Base Access
Software Update
Diagnosis
Phone Support
Service Type:Exchange
Manufacturer Part Number:CON-SNT-FLSA1125
Manufacturer Website Address:http://www.cisco.com
Service Name:SMARTnet
Manufacturer:Cisco Systems
Inc
Product Supported:Cisco 2.5G to 10Gbps upgrade License for ASR 1
Service Main Type:Exchange
Service Sub Type:Electronic and Physical