Description
The MX10K-LC9600 line card combines Packet Forwarding Engines based on custom ASICs by Juniper Networks. The line card has six fowarding ASICs, each hosting two Packet Forwarding Engines.The line card has 12 Packet Forwarding Engines, each providing a maximum bandwidth of 800 Gbps.
You can channelize the ports using breakout cables to speeds of 400 Gbps, 200 Gbps, 100 Gbps, 50 Gbps, 40 Gbps, 25 Gbps, or 10 Gbps.
The 9.6-Tbps line card is designed to operate only with the following components:
-
JNP10004-SF2 and JNP10008-SF2 switch fabric
-
JNP10K-PWR-AC3, JNP10K-PWR-AC2, or JNP10K-PWR-DC2 power supplies
-
The JNP10008-FAN2 fan tray
-
The JNP10008-FTC2 fan tray controller
-
JNP10004-FAN2 fan tray
-
JNP10004-FTC2 fan tray
The MX10K-LC9600 line card runs the Juniper Networks Junos OS software on Juniper Networks JNP10K-LC9600 hardware. The MX10K-LC9600 plugs in to the MX10004 and MX10008 routers horizontally at the front of the chassis.
The fabric interface connectors on the MX10K-LC9600 line card have a preinstalled protective plastic dust cover. This cover keeps the connectors clean and free of dust and other particles. Remove the dust cover before you install the line card in the router. Save the plastic cover for future use to re-install when you remove the line card from the router.
The WAN ports on the MX10K-LC9600 line card also have preinstalled protective plastic dust covers. These covers keep the ports clean and free of dust and other particles. Keep these covers installed in any port that is not occupied by an optic module.