Description
Tripp Lite Hardened Gigabit Fiber to Ethernet Media Converter
10/100/1000 Mbps
RJ45/SC Singlemode
-10° to 60°C
10 km (6.2 mi.) – 1 x Network (RJ-45) – 1 x SC Ports – DuplexSC Port – Single-mode – Gigabit Ethernet – 10/100/1000Base-T
1000Base-X – Wall Mountable
DIN Rail Mountable
Desktop – TAA Compliant CONVERTER RJ45/SC SMF 10/100MBPS
Features | Extends a Network Connection up to 10 km over SC Singlemode Fiber Optic Cable
This network media converter converts a copper Gigabit Ethernet signal to a singlemode fiber optic signal and extends it to a second network device up to 10 kilometers (6.2 miles) away. Because copper Cat5e/6 cables are limited to only 100 meters
it is more effective to couple the N785-H01-SCSM with singlemode fiber cable to reach hubs
switches and other network devices located farther away. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling.
Monitor Your Installation with Link Fault Signaling and Loop Back Functions
Determine the health of your network connection via the Link Fault Signaling (LFS) and Loop Back functions. The LFS LED indicates when a copper or fiber cable has been severed or another cause of disruption in service has occurred. The Local Loop Back (LLB) and Remote Loop Back (RLB) functions ensure copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off.
LEDs Indicate Installation Performance and Diagnostic Functions
Easy-to-read LEDs on the side of the unit indicate essential status information
including network speed and connection
LFS diagnostics and unit power.
Protective Metal Housing Built to Withstand a Variety of Hazards
The hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD)
radio frequency interference (RFI) and power surges. Hardware is included for wall or DIN mounting.
Works in Tandem with Tripp Lite’s N785-CH12 Chassis
House and power up to 12 Tripp Lite media converters
including the N785-H01-SCSM
using the N785-CH12 12-port chassis (sold separately) to create an organized installation.
TAA-Compliant for GSA Schedule Purchases
The N785-H01-SCSM is compliant with the Federal Trade Agreements Act (TAA)
which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Product Type:Transceiver/Media Converter
Maximum Distance Supported:6.21 Mile
Power Source:AC Adapter
Form Factor:Desktop|DIN Rail Mountable|Wall Mountable
Network Technology:10/100/1000Base-T|1000Base-X
Ethernet Technology:Gigabit Ethernet
Number of Network (RJ-45) Ports:1
Network (RJ-45):Yes
Number of SC Ports:1
Media Type Supported:Twisted Pair|Optical Fiber
Fiber Mode Supported:Single-mode
Total Number of Ports:2
SC Port Type:Duplex
TAA Compliant:Yes
Manufacturer Part Number:N785-H01-SCSM
Manufacturer Website Address:http://www.tripplite.com
Manufacturer:Tripp Lite by Eaton
Product Model:N785-H01-SCSM
Product Name:N785-H01-SCSM Transceiver/Media Converter
Fiber Optic Wavelength:1310 nm
Package Contents:
50/60 Hz
0.5A; Output: 12VDC 1.5A)
Country of Origin:Taiwan
Environmentally Friendly:Yes
Environmental Certification:WEEE|RoHS
Weight (Approximate):8.43 oz
Height:0.9″
Width:2.9″
Depth:4.3″
Power Consumption:1.80 W
Plug/Connector Type:NEMA 1-15P
