Tripp Lite NPOEI-90W-1G

$177.25

Add to quote
SKU: NPOEI-90W-1G UPC: Brand: Tripp Condition: New Category: Tag:

Description

Tripp Lite Gigabit Ethernet PoE Injector Industrial 90W PoE++ IP30 1-Port – 57 V DC Input – 1 x Ethernet Input Port(s) – 1 x RJ-45 Output Port(s) – Black INDUSTRIAL 90W POE++ IP30 1-PORT

Now You Can Add a PoE Device to Your LAN Without a PoE Switch
Add a surveillance camera
wireless access point
VoIP phone
outdoor kiosk
smart lights or other PoE (Power over Ethernet) device to your home or office network
even if your network switch doesn’t support PoE. Instead of making an expensive upgrade to a PoE switch
you can use this single-port PoE++ injector to send 90W of power
as well as Gigabit Ethernet data
through your existing Cat5e/6/6a cabling. It is recommended for outdoor applications
such as LED lights
security cameras and heater elements.

Saves You Time and Money on Unnecessary Equipment Updates
This compact PoE plus injector delivers 10/100/1000 Mbps (1 Gbps) of data and up to 90W of power using existing Cat5e/6/6a cables. That means
in addition to not buying a new PoE network switch
you also don’t need to install new AC power lines and electrical outlets. This cost-effective midspan injector sends DC power and Ethernet data through your Ethernet cable
cutting down on cable clutter
equipment costs and installation time and labor.

Expand Your PoE Network Up to 328 ft.
The NPOEI-90W-1G delivers both power and data to any IEEE 802.3af (PoE)
802.3at (PoE+) or 802.3bt (4PPoE) device up to 328 feet (100 meters) away. This allows you to install a device in a building lobby
on a ceiling
inside a warehouse or anywhere else an AC power outlet is unavailable. The PoE+ injector supports full-duplex 2 Gbps communication for sending and receiving data simultaneously. It also protects your device against short circuits
high voltage and overloads.

Simple Plug-and-Play Installation Has Your Device Connected in Minutes
No configuration or software is required to add the NPOEI-90W-1G to your LAN (local area network). Just connect your switch or Ethernet network to the shielded RJ45 LAN port and your PoE device to the shielded RJ45 PoE port using existing Cat5e/6/6a cable. The included terminal block offers dual primary and redundant power inputs. DIP switches and LEDs help you find the right settings for your application. The NPOEI-90W-1G automatically detects which connected devices are compatible.

Designed for Installation on a DIN Rail
A DIN rail kit is included for mounting the IP30-rated metal housing on a well-grounded corrosion-free rail. The fanless design is ideal for silent operation.

Product Type:PoE Injector
Output Ports:1 x RJ-45
TAA Compliant:Yes
Product Color:Black
Manufacturer Part Number:NPOEI-90W-1G
Manufacturer Website Address:http://www.tripplite.com
Manufacturer:Tripp Lite by Eaton
Product Model:NPOEI-90W-1G
Product Name:NPOEI-90W-1G PoE Injector
Input Ports:1 x Ethernet
Additional Information:

  • Operating Temperature Range: -49 to 167 F (-40 to 75 C)
  • Storage Temperature Range: -49 to 185 F (-40 to 85 C)
  • Relative Humidity: 5 to 95% RH
    Non-Condensing

Package Contents:

  • NPOEI-90W-1G PoE Injector
  • 24-57VDC Terminal Block
  • DIN Rail-Mounting Kit
  • Quick Start Guide

    • Compatibility:

    • Surveillance Camera
    • Wireless Access Point
    • VoIP Phone
    • Outdoor Kiosk
    • Smart Lights
    • PoE (Power Over Ethernet) Device

    Certifications & Standards:

    • CE
    • FCC

    IEEE Standards Supported

    • 802.3af
    • 802.3at
    • 802.3bt

    Country of Origin:Taiwan
    Environmentally Friendly:Yes
    Environmental Certification:REACH|RoHS
    Form Factor:DIN Rail/Wall/Rack Mountable
    Height:4.6″
    Width:1″
    Depth:3.9″
    Input Voltage:57 V DC
    Maximum Frequency:60 Hz
    Minimum Frequency:50 Hz
    Protection Type:Short Circuit|Over Voltage|Overload Protection

    Related products