Description
Perle PSI-MOS-RS232/FO 850 E Transceiver/Media Converter – 1 x ST Ports – DuplexST Port – Multi-mode – Rail-mountable RS232 TO 850NM SINGLE FIBER
The PSI-MOS-RS422/FO 850 E Serial to Fiber Converter transparently connects 4-wire RS422/RS485 and INTERBUS devices to fiber optic cable. By transmitting serial data over optical fiber, these serial media converters provide an economical path to extend the reach of RS422 and RS485 devices.
Long Distance Serial Data Transmission over Fiber
Using the FO 850 E Serial to Fiber Converter you can extend your serial data transmission up to 4.2km (2.6 miles). The result is that any two pieces of asynchronous serial equipment, located miles apart, can communicate at full duplex over fiber optic cable at rates up to 2 Mbps.
EMI, RFI and Transient Surge Immunity
Another advantage of the FO 850 E fiber optic transmission system is the electrically isolated connection of devices. Electromagnetic interference (EMI) is a common phenomenon in typical environments like industrial plants, warehouses and factory floors. This interference can cause corruption of data over RS422 or copper-based Ethernet links. Data transmitted over fiber optic cable however is completely immune to this type of noise, thus preventing the negative effects of voltage equalization currents and electromagnetic interference on the data cables. A Serial to Fiber Media Converter therefore enables you to inter-connect your serial devices over fiber ensuring optimal data transmission, increased availability of the system, and improved network design flexibility for point-to-point connections and star structures.
Flexible Fiber Optic Connections
The FO 850 E operates at 850 nm wavelength, using a separate LED emitter and photo-detector on ST type connectors. Almost any multimode glass fiber size can be used including 50/125 m, 62.5/125 m, and 200/230 m.
Power Budget Considerations
Calculating the power budget is critically important with planning the fiber optic link. The optical power budget is the amount of light required to transmit data successfully over distance through a fiber-optic connection. The amount of light energy available within the setup will dictate the length of the fiber optic cable run between serial media converters within the network. Optical power budgets are critical to help businesses avoid signal distortion. To learn how to calculate optical power budget read our technical note. Transmit and receive dBm can be found in the Hardware specifications.
Transmit each serial signal out over 10 fiber optic lines
Up to ten (10) Serial to Fiber Converters can be grouped together using the TBUS DIN Rail bus system for voltage and data. This allows the serial converter to operate as a star coupler, taking the serial data input signal and distributing it to all Fiber optic output ports.
Product Type:Transceiver/Media Converter
Maximum Distance Supported:2.61 Mile
Power Source:Power Supply
Form Factor:Rail-mountable
USB:No
DVI:No
Network (RJ-45):No
Number of ST Ports:1
Media Type Supported:Optical Fiber
Fiber Mode Supported:Multi-mode
Total Number of Ports:2
ST Port Type:Duplex
Manufacturer Part Number:27083718
Manufacturer Website Address:http://www.perle.com
Packaged Quantity:1
Manufacturer:Perle Systems
Inc
Product Model:PSI-MOS-RS232/FO 850 E
Product Name:PSI-MOS-RS232/FO 850 E Transceiver/Media Converter
Management Port:No
Fiber Optic Cable Standard:50/125 µm|62.5/125 µm
Fiber Optic Wavelength:850 nm
Country of Origin:Germany
Environmentally Friendly:Yes
Environmental Certification:RoHS|China RoHS|REACH
Weight (Approximate):6.71 oz
Height:3.9″
Width:1.4″
Depth:4.1″
