Description
Cisco IP-SM Indoor Ceiling Mountable
Wall Mountable
In-wall Speaker – White – 15 W (PMPO) – 8″ – 3″ – 86 Hz to 15.50 kHz – 8 Ohm WITH MICROPHONE
AtlasIED IP-SM indoor wall / ceiling mount IP speakers with talkback leverage the VoIP Communication solution to extend tele-presence with enhanced audio for those environments where network-wide communication is desired and that require large speakers with high output to overcome high ambient noise areas or large spaces.
AtlasIED IP-SM registers as a communication endpoint directly within InformaCast
and SA-Announce Advanced Notification applications
supporting audio broadcast to enhance physical security while improving day-to-day communications through advanced alerting
bell schedules
pre-recorded
scheduled announcements
& intercom
while leveraging the WAN/LAN Network Architecture.
When used within a Cisco Environment
these same IP speakers from AtlasIED can join Cisco’s Unified Survivable Remote Site Telephony (SRST) as a supported device within SRST endpoint Architecture. Cisco’s SRST provides remote location call-processing redundancy when access to the centralized Cisco Unified Communications Manager is interrupted because of a WAN outage. The ability of LAN communication between any combination of phones and speakers is particularly critical during an emergency (which may be the actual cause of the WAN outage).
Where 3rd party notification applications are not required
the I8SM+ speakers can register as SIP devices directly to a SIP server or VoIP Communications Manager for critical alerts /public address applications and two-way communication.
Ideal for Corporate Applications
Education Institutions
Entertainment Complexes
Industrial Facilities
Government Buildings
Healthcare Facilities
Houses of Worship
Transportation Hubs – anywhere critical alerts / public address needs exist
and prefer using a single enterprise-class communications platform.
Features
IP-SM indoor speakers are fitted with an 8″ (205mm) coaxial speaker that is optimized for voice intelligibility.
The grills for the IP-SM IP speakers are made of 18-gauge metal construction that provides security and durability in commercial applications. The baffle is finished in neutral white electrostatic powder coat and is packaged with all necessary mounting screws.
IP-SM includes an omni directional subminiature
electret condenser microphone that is mounted behind the grille’s steel perforation material adjacent to the speaker to allow two-way communication and/or monitoring from the speaker location to any PC or phone handset.
All Atlas IP speakers consist of a factory assembled speaker
grill
and PCB amp/control board that is securely mounted to the rear of the grill.
The IP-SM features include auto-provisioning and auto-registration. This is an easy and time-saving way to configure our IP speakers on your Voice VLAN
similar to a VoIP handset. By sitting on the same VLAN
both VoIP phones and IP speakers share the same Quality of Service (QoS) so communications are always secure and guaranteed
Features include GPI/O ports offer trigger for intercom request
critical alert notification
or unified connectivity of third party systems.
Application/Usage:Industrial|House of Worship|Healthcare|Entertainment Center|Education|Corporate|Transportation|Public Building
Product Type:Speaker
Impedance:8 Ohm
Sensitivity:98 dB
Form Factor:Ceiling Mountable|In-wall|Wall Mountable
Minimum Frequency Response:86 Hz
Maximum Frequency Response:15.50 kHz
PMPO Output Power:15 W
Product Color:White
Manufacturer Part Number:SP-ATLAS-IP-SM=
Manufacturer Website Address:http://www.cisco.com
Manufacturer:Cisco Systems
Inc
Product Model:IP-SM
Product Name:Atlas POE+ Indoor Wall / Ceiling Mount IP Speaker with Talkback Microphone
Country of Origin:United States
Weight (Approximate):4.25 lb
Height:14.4″
Width:12.9″
Depth:3.42″
Speaker Installation:Indoor
Tweeter Driver Size:3″
Woofer Driver Size:8″
