Description
Tripp Lite 2200VA 1920W UPS Smart Lithium Ion LiFePO4 LCD USB DB9 2URM – 2200 VA/1920 W – 110 V AC, 115 V AC, 120 V AC – 5.10 Minute – 2U Rack-mountable – 5.10 Minute – 4 x NEMA 5-15/20R, 4 x NEMA 5-20 – Over Voltage, Under Voltage USB LIFEPO4 LCD LITHIUM ION
Protects Mission-Critical Rack-Mounted Equipment
- Provides fully regulated sine wave AC output for servers, network storage devices, telecom hardware and other applications where long battery lifespan is critical
- Audible alarm signals loss of utility power, overload and low battery
- 4 NEMA 5-15R & 4 NEMA 5-15/20R outlets
- 10-ft. (3.05 m) power cord with 120V NEMA 5-20P input
- 570-joule surge suppression rating
- 0.9 power factor rating
- 97% line-mode efficiency rating saves money in energy costs
Superior LiFePO4 Battery Backup Compared to Equivalent Lead Acid Battery
- More than 2x the service life
- Up to 3x more charge/discharge cycles
- Recharges to 100% capacity in less than 2 hr.
- Weighs 60% less, reducing overall UPS weight
- Supports half load up to 11.7 min. and full load up to 5.1 min.
2 Load Banks with Switchable Outlets
- Can control 2 outlets remotely to reboot equipment or shed nonessential loads
Automatic Voltage Regulation (AVR)
- Maintains 120V nominal output over input range of 83V-145V without using battery power
EMI/RFI Line Noise Filtering
- Removes electromagnetic and radio frequency interference that can disrupt or damage equipment’s performance
Interactive LCD Screen
- Front-panel LCD with detailed UPS and site power status and operating data
- Rotates for easy viewing in rack-mount or tower configurations
Optional Network Management Cards
- Compatible with Tripp Lite UPS management cards WEBCARDLX, SNMPWEBCARD and RELAYIOCARD
Communications Ports
- USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite PowerAlert software (available via free download at
Versatile Installation Options
- Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack
- Mounts on wall or 2-post rack with optional 2POSTRMKITWM accessory
- Mounts in upright tower position with optional 2-9USTAND accessory
Backed by Tripp Lite’s Ultimate Lifetime Insurance
- $250,000 Ultimate Lifetime Insurance covers any connected components
Application/Usage:Server|Network Storage Device
Product Type:Line-interactive UPS
Hot Swappable:Yes
Input Voltage:120 V AC
Form Factor:Rack-mountable
Waveform Type:Pure Sine Wave
Rack Height:2U
Plug/Connector Type:NEMA 5-20P
Phase:Single Phase
Receptacle Type:NEMA 5-15/20R|NEMA 5-20
Product Family:SmartPro
Backup/Run Time (Half Load):11.70 Minute
Backup/Run Time (Full Load):5.10 Minute
Load Capacity (VA):2200 VA
Load Capacity (W):1920 W
Typical Battery Recharge Time:1.40 Hour
Thermal Dissipation:393.59 W
Maximum Operating Temperature:122°F (50°C)
Sound Emission (A-Weighted):45 dB(A)
Manufacturer Part Number:SMART2200RM2UL
Manufacturer Website Address:http://www.tripplite.com
Manufacturer:Tripp Lite by Eaton
Product Model:SMART2200RM2UL
Product Name:SmartPro SMART2200RM2UL 2200VA UPS
Product Line:SmartPro
USB:Yes
Serial Port:Yes
Alarm:Low Battery|Overload|Power Failure|Remote Shutdown|UPS Fault|UPS StartUp
Package Contents:
Certifications & Standards:
- UL1778 (USA)
- Tested to CSA (Canada)
- Tested to NOM (Mexico)
- Meets FCC Part 15 Category A (EMI)
Country of Origin:United States
Environmentally Friendly:Yes
Environmental Certification:RoHS
Weight (Approximate):41.78 lb
Height:3.4″
Width:19.4″
Depth:17.3″
Circuit Breaker:Yes
Output Voltage:110 V AC|115 V AC|120 V AC
Input Current:16 A
Surge Energy Rating:570 J
Emergency Power OFF:Yes
Protection Type:Over Voltage|Under Voltage
EMI/RFI Noise Filter:Yes
Transfer Time:5 ms
Receptacle Detail:4 x NEMA 5-20|4 x NEMA 5-15/20R
